GRAND D600L
Technical Data
| Length overall (cm) | 612 |
| Length internal (cm) | 440 |
| Width overall (cm) | 250 |
| Width internal (cm) | 154 |
| Tube diameter (cm) | 50 |
| № of chambers | 5 |
| Tube material | PVC / Hypalon |
| Board height (cm) | 72 |
| Draft maximum (when fully loaded) (cm) | 48 |
| Dry boat weight (kg) | 597 |
| Loading capacity (kg) | 1110 |
| Passengers capacity | 12 |
| Built-in fuel tank capacity (l) | 140 |
| № of motors | 1 |
| Engine recommended (HP) | 130 |
| Engine weight max (kg) | 250 |
| Engine shaft length (mm) | 635 |
| Midsection / aft deadrise (degrees) | 22° / 22° |
| Hull type | RIB |
| Boat design category | C |
| Stowed dimensions of package №1 (cm×cm×cm) | 624х224х124 |
| Stowed dimensions of package №2 (cm×cm×cm) | 105х95х125 |
| Stowed dimensions of package №3 (cm×cm×cm) | 120х60х960 |
| Transport gross weight (kg) | 707 |
SCHEME OF COMPARTMENTS
1 – Bow anchor compartment
2 – Roomy nose compartment
3 – The warehouse is a deck compartment
4 – Mini cabin in the steering console (galley – option)
5 – Glove compartment
6 – Fuel tank (260 l)
7 – The compartment in the passenger rack (refrigerator - option)
8 – Sealed compartment
9 – Rear rack for drinks
10 – Side feed locker
11, 12 – Large aft locker
13 – Cranlin with a niche for the ends
SCHEME BOAT
1. «Deep V» fiberglass hull with HSH (High-Step-Hull) system and transom expansion (standard color: white)
2. 5-section inflatable balloon (standard material: PVC, 1400 g / m², light-gray)
3. Double tear drop rubbing strake
4. Bow anchor compartment with a soft removable pillow
5. Steering console CL-25 with front soft seat, mini cabin (inside), windshield, glove box, side railings and 2 stainless steel glass holder
6. Double seat SD-25 with two folding seats, sealed compartment and 2 stainless steel glass holder
7. Stern U-shaped sofa with soft back
8. 2 fodder precision-cast push-up cleat
9. 2 stainless handrail on the side of the stern sofa
10. Two swimming platforms with ladder & handrail
11. Two fodder compartments for storing mooring lines
12. Waterski towing arch with GRP top (option)
13. Bow step plate with a soft back and 2 cleats
14. Stainless steel bow railing (option)
15. Roomy nose compartment with soft removable cushions, 2 stainless steel glass holder
Gallery
Equipment
Standard equipment
- Усиленный стеклопластиковый корпус типа «Ультра глубокое V» с системой HSH (High-Step-Hull); White
- 5-секционный надувной баллон с стеклопластиковыми законцовками
- Носовая якорная накладка с двумя утками из нержавеющей стали
- Форпик — носовой якорный отсек с мягкой съемной подушкой
- Вместительный носовой отсек с мягкими съемными подушками
- Рулевая стойка CL-26 со съемным передним сиденьем с мягкой подушкой, ветровым стеклом и поручнем
- Откидная двухместная стойка SD-26
- Кормовой диван с мягкими подушками, высокими съемными спинками сидений и двумя боковыми рундуками
- Два больших кормовых отсека для хранения
- Встроенная топливная система с пластиковым баком на 140 л и сенсором 240-33 Ω
- Гофрированный шланг в межпалубном пространстве для скрытого монтажа коммуникаций
- Инспекционный палубный люк
- Антискользящая поверхность палубы
- Система водоотлива
- Система вентиляции корпуса
- Швартовочные и буксировочные узлы
Optional equipment
- Два клапана избыточного давления
- Носовой нержавеющий релинг безопасности с опорами
- Подушки носовые съёмные
- Съемный носовой сандек с подушками
- Навигационная арка / арка буксировки лыжника
- Комплект электрооборудования
- Указатель уровня топлива
- Механическая система рулевого управления
- Гидравлическая система рулевого управления
- Кормовые платформы с нерж. лестницей для подъема из воды
- Подпалубный люк с газовыми пружинами
- Набор душевой (50 л)
- Защита киля/баллонов
- Защитный чехол на лодку
- Защитный чехол на стойки \ кормовой диван
- T-образная солнцезащитная крыша
- Расширение солнцезащитного тента для носовой части лодки
- Расширение солнцезащитного тента для кормовой части лодки
- Съемный кормовой сандек с подушками
Outboard motors
YAMAHA VF150XA (F150CETX)
|
YAMAHA F150XB (F150DETX)
|
YAMAHA F130XA (F130AETX)
|
YAMAHA VF115XA (F115CETX)
|
YAMAHA F115XB (F115BETX)
|
|
|---|---|---|---|---|---|
| Engine type | 4-stroke, in-line, 16-valve dual overhead camshaft (DOHC) with variable valve timing (VCT), belt drive | 4-stroke, in-line, 4-cylinder, 16-valve mechanism with two overhead camshafts (DOHC), belt drive | 4-stroke, in-line, 4-cylinder, 16-valve mechanism with two overhead camshafts (DOHC), belt drive | 4-stroke, in-line, 4-cylinder, 16-valve mechanism with two overhead camshafts (DOHC) | 4-stroke, in-line, 4-cylinder, 16-valve mechanism with two overhead camshafts (DOHC), belt drive |
| Displacement | 2785 cm³ | 2670 см³ | 1832 cm³ | 1832 cm³ | 1832 cm³ |
| Bore × Stroke | 96.0 mm × 96.2 mm | 94.0 mm × 96.2 mm | 81.0 mm × 88.9 mm | 81.0 mm × 88.9 mm | 81.0 mm × 88.9 mm |
| Max. prop shaft output | 110.3 kW (150 hp) | 110.3 kW (150 hp) @5500 r/min | 95.6 kW (130 hp) @5800 r/min | 84.6 kW (115 hp) | 84.6 kW (115 hp) @5800 r/min |
| Fuel induction system | Electronic Fuel Injection (EFI) | Electronic Fuel Injection (EFI) | Electronic Fuel Injection (EFI) | Electronic Fuel Injection (EFI) | Electronic Fuel Injection (EFI) |
| Lubrication system | Wet sump | Wet sump | Wet sump | Wet sump | Wet sump |
| Engine transom height | X: 643 mm (25.3 inch) | X: 643 mm (25.3 inch) | X: 643 mm (25.3 inch) | X: 643 mm (25.3 inch) | X: 643 mm (25.3 inch) |
| Weight | 227 kg | 227 kg | 180 kg | 180 kg | 179 kg |
| Engine Start | Electronic Starter | Electronic Starter | Electronic Starter | Electronic Starter | Electronic Starter |
| Steering | Remote / mechanical | Remote | Remote | Remote / mechanical | Remote |
| Trim Control System | Power trim and tilt | Power trim and tilt | Power trim and tilt | Power trim and tilt | Power trim and tilt |
| more | more | more | more | more |
Fiberglass hull colors
Tube colors
Upholstery colors (UPholstery colors)
SeaDeck colors
Steering wheel
Standard equipment
-
Reinforced fiberglass hull of "Extra Deep V" type with HSH (High-Step-Hull) system; WhiteInflatable balloon, PVC (Germany), Light-Grey, 1400 g / m² (5 air filling valves, reinforced fender with water deflector, 1 bow and 12 side safety handles)Bow step plate with two cleatsAnchor locker and compartment with soft cushionSpacious bow compartment with soft removable cushions and 2 stepsSteering console CL-26 with removable front seat, windshield and handrailHelm and passenger SD-26 with pivot seatsRear seat with two side lockers, soft cushions and high removable seat backsTwo large aft storage compartmentsIntegrated fuel system with 140 l plastic tank and 240-33 Ω sensorCorrugated hose in between decks space for flush-mounted communicationsInspection deck hatchAntiskid deck surfaceDrainage system (self-draining cockpit with non-return valves and drain plug)Hull ventilation system2 fodder precision-cast cleat1 bow and 2 rear stainless U-boltsStainless lifting knots (2 lifting foldable stainless steel rings)Details made of stainless steel steel protected by black powder coating2 assembling oars, suitable for inflatable boatsProfessional Foot Pump BRAVO-8Repair kit and user manual
Factory equipment
Optional equipment
Configurator - Specification - Kit for installation Yamaha outboards (Mechanical Electronic Control)
-
i
6Y8 Round Tacho + Speedo/FMM Kit, 704 Top Mount Single, Panel Switch Assy Single, Main Harness 10P, Water/Fuel Separator Filter, Y-COP Kit
6Y8 Round Tacho + Speedo/FMM Kit, 704 Top Mount Single, Panel Switch Assy Single, Main Harness 10P, Water/Fuel Separator Filter, Y-COP Kit
-
i
CL5 Single mechanical rigging kit, 704 Top Mount Single, Panel Switch Assy Single, Main Harness 10P, Water/Fuel Separator Filter, Y-COP Kit
CL5 Single mechanical rigging kit, 704 Top Mount Single, Panel Switch Assy Single, Main Harness 10P, Water/Fuel Separator Filter, Y-COP Kit
-
Configurator - Specification - Kit for installation Yamaha outboards (Digital Electronic Control)
-
i
HELM MASTER EX - LEVEL 1 STANDARD
6X9 DEC Top mount – single, CL5 Color Touch Gauge Kit – DEC, Main Switch, Immobilizer Kit, Main harness 16P, Water/Fuel Separator Filter
-
i
HELM MASTER EX - LEVEL 1
6X9 DEC Top mount – single, CL5 Color Touch Gauge Kit – DEC, EKS Kit – Single, Main harness 16P, Water/Fuel Separator Filter
-
i
HELM MASTER EX - LEVEL 2 BOLT-ON
6X9 DEC Top mount – single, CL5 Color Touch Gauge Kit – DEC, EKS Kit – Single, Main harness 16P, Water/Fuel Separator Filter, Digital Electric Steering Bolt-On Kit – Single
-
i
HELM MASTER EX - LEVEL 3-4 BOLT-ON
6X9 DEC Top mount – single, CL5 Color Touch Gauge Kit – DEC, EKS Kit – Single, Main harness 16P, Water/Fuel Separator Filter, Digital Electric Steering Bolt-On Kit – Single, Joystick/Auto Pilot Kit – Single
Standard equipment: 931 512 грн Interior | Exterior: 0 грн Equipment: 0 грн Outboard motor: 0 грн Optional equipment: 0 грн Trailer: 0 грн Amount: 931 512 грн Discount: * - 0 грн Discounted amount: 0 грн
Fields marked with an asterisk *, are required
Fields marked with an asterisk *, are required
Fields marked with an asterisk *, are required0