GRAND G420
Transfer and more. An agile 4.2m/14ft inflatable tender boat with motor up to 60HP. Completing our modern and deluxe yacht tender line, G420 is the big sister featuring lots of functionalities. Spacious and clever design brings forth a sundeck and waterski mast options, making it a fun and capable small RIB boat not only to safely transfer guests in comfort, but also to ride the waves. Take everything from every journey.
Technical Data
| Length overall | 4.20 m |
| Length internal | 2.90 m |
| Width overall | 2.00 m |
| Width internal | 1.05 m |
| Tube diameter | 0.48 m |
| № of chambers | 4 |
| Tube material | PVC or Hypalon |
| Board height | 0.60 m |
| Draft maximum (when fully loaded) | 0.42 m |
| Dry boat weight | 250.0 kg |
| Loading capacity | 750.0 kg |
| Passenger capacity | 6 persons |
| Fuel tank capacity | 55.0 l |
| № of motors | One |
| Engine recommended | 40 - 60 HP |
| Engine weight max | 120.0 kg |
| Engine shaft length | L: 20 inch / 508 mm |
| Midsection / aft deadrise (degrees) | 20° / 17° |
| Hull type | RIB |
| Boat design category | C |
| Package dimensions №1 | 4100×1900×1010 (h) mm |
| Package dimensions №2 | 1100×720×980 (h) mm |
| Boat weight in package | 270.0 kg |
COMPARTMENT CHART
1 – Bow anchor compartment
2 – Bow compartment
3 – A compartment in the steering console
4 – Fuel tank (55 l)
5 – Large aft locker
GENERAL ARRANGEMENT OF A BOAT
1 – «Deep V» fiberglass hull with HSH system and transom expansion
2 – Soft curved 4-chamber reinforced inflatable buoyancy tube
3 – Fender guard
4 – Anti-slip deck surface / Antiskid SeaDeck set
5 – Steering console CL-24 with front soft seat, windshield, glove box
6 – Steering wheel
7 – Steering console handrail
8 – Safety handles
9 – Stainless steel bow rail
10 – Bow locker with removable cushion
11 – Bow step plate with 2 cleats
12 – Stern sofa with soft back
13 – Reinforced transom for engine installation
14 – Fodder precision-cast push-up cleat
15 – Fiberglass step ends
16 – Gas tank cap
Gallery
Equipment
Standard equipment
- 4-chamber variable cross-section inflatable tube «DART» with GRP stepends, handles and rubbing strake
- Bow step plate with mooring cleats
- Fiberglass «Deep-V» hull «High-Step-Hull» (HSH) with enlarged cockpit «DART Hull» and transom extension «Swallow tail»
- Bow and roomy aft storage compartment
- Steering console CL-24 with front seat / storage compartment; with windscreen and handrails; Dashboard (can accommodate MFD up to 9')
- Mechanical steering system (Non reversible rotary steering system T73), steering cable (M66)
- Steering wheel
- Integrated aft settee
- Set of seating cushions and backrests, Silvertex upholstery
- Two stainless steel handrails on the side of the aft settee
- Stainless steel cupholder on the steering console
- Hull ventilation system
- Anti-skid deck surface
- Self-draining cockpit with drainage system
- Inspection hatch
- Corrugated hose in the interdeck space for concealed installation of communications
- Two stern retractable cleats in polished stainless steel
- Integrated towing & lifting eyes
- Two collapsible oars
- Foot pump, maintenance kit and owner's manual
Optional equipment
- Overpressure valves
- Removable bow sundeck kit
- SeaDek soft anti-skid flooring
- Premium steering wheel PERFORMANCE (black)
- Electric package
- Inbuilt fuel system with 40lit / 10gal tank
- Bow railings on-tube installation
- Waterski towing mast
- Black powder coated stainless steel upgrade
- Canvas bimini-top, collapsible
- Overall and harbour covers
- Keel & tube protector package
Outboard motors
YAMAHA F40FETL
|
YAMAHA F50HETL
|
YAMAHA F60FETL
|
|
|---|---|---|---|
| Engine type | 4-Stroke, SOHC, In-Line 3 | 4-Stroke, 8-Valve, SOHC, In-line 4 | 4-Stroke, 8-Valve, SOHC, In-line 4 |
| Displacement | 747 cm³ | 996 cm³ | 996 cm³ |
| Bore × Stroke | 65.0 × 75.0 mm | 65.0 × 75.0 mm | 65.0 × 75.0 mm |
| Max. prop shaft output | 29.4 kW / 40 hp | 36.8 kW / 50 hp | 44.1 kW / 60 hp |
| Fuel induction system | Electronic Fuel Injection (EFI) | Electronic Fuel Injection (EFI) | Electronic Fuel Injection (EFI) |
| Lubrication system | Wet sump | Wet sump | Wet sump |
| Engine transom height (Shaft length) | L: 536 mm (21.1 inch) | L: 527 mm (20.7 inch) | L: 527 mm (20.7 inch) |
| Weight | 98,0 kg | 114,0 kg | 114,0 kg |
| Engine Start | Electronic Starter | Electronic Starter | Electronic Starter |
| Steering | Remote | Remote Control | Remote Control |
| Trim Control System | Power trim and tilt | Power trim and tilt | Power trim and tilt |
| more | more | more |
Fiberglass hull colors
Tube colors
Upholstery colors (UPholstery colors)
SeaDeck colors
Steering wheel
Standard equipment
-
5-chamber inflatable tube with GRP stepends and handles (10+1 pcs), PVC 1100 g/sq.m. (color to choose)Bow step plate with mooring cleatsFiberglass «Deep-V» hull «High-Step-Hull» (HSH) with enlarged cockpit «DART» and transom extension (white color)Bow and roomy aft storage compartmentSteering console CL-24 with front seat / storage compartment; with windscreen and handrails; Dashboard (can accommodate MFD up to 9')Mechanical steering system (Non reversible rotary steering system T73), steering cable (M66)Steering wheelIntegrated aft setteeSet of seating cushions and backrests, Silvertex upholsteryTwo stainless steel handrails on the side of the aft setteeStainless steel cupholder on the steering consoleHull ventilation systemAnti-skid deck surfaceSelf-draining cockpit with drainage systemInspection deck hatchCorrugated hose in the interdeck space for concealed installation of communicationsTwo stern retractable cleats in polished stainless steelOne bow and two rear stainless steel D-bolts for securing/transporting the boat on a trailerPad eyes stainless steel for lifting the boat with a crane beamTwo collapsible paddlesHi volume foot pumpMaintenance kit
Factory equipment
Optional equipment
Mechanical Remote Controli
Installation kit (6X3+6Y8 Tacho) for outboard motors 20-70HP:
• 6X3 Remote Control Flush Mount (left side)
• 6Y8 Round Tachometer Kit
• 6R5 Panel switch assy Single
• Main harness 10P
• Premium remote control cable (YPM) – 2 pcs.
• Water/Fuel Separator Filteri
Installation kit (6X3+6Y8 Tacho+Speedo/FMM) for outboard motors 30-70HP:
• 6X3 Remote Control Flush Mount (left side)
• 6Y8 Round Tacho + Speedo/FMM Kit
• 6R5 Panel switch assy Single
• Main harness 10P
• Premium remote control cable (YPM) – 2 pcs.
• Water/Fuel Separator Filteri
Y-COP Attachment Kit
i
Propeller Aluminum, White, G
i
Propeller Black Stainless Steel, G
i
Installation kit (6X3+6Y8 Tacho) for outboard motors 20-70HP:
• 6X3 Remote Control Flush Mount (left side)
• 6Y8 Round Tachometer Kit
• 6R5 Panel switch assy Single
• Main harness 10P
• Premium remote control cable (YPM) – 2 pcs.
• Water/Fuel Separator Filteri
Installation kit (6X3+6Y8 Tacho+Speedo/FMM) for outboard motors 30-70HP:
• 6X3 Remote Control Flush Mount (left side)
• 6Y8 Round Tacho + Speedo/FMM Kit
• 6R5 Panel switch assy Single
• Main harness 10P
• Premium remote control cable (YPM) – 2 pcs.
• Water/Fuel Separator Filteri
Y-COP Attachment Kit
i
Propeller Aluminum, White, G
i
Propeller Black Stainless Steel, G
i
Installation kit (6X3+6Y8 Tacho) for outboard motors 20-70HP:
• 6X3 Remote Control Flush Mount (left side)
• 6Y8 Round Tachometer Kit
• 6R5 Panel switch assy Single
• Main harness 10P
• Premium remote control cable (YPM) – 2 pcs.
• Water/Fuel Separator Filteri
Installation kit (6X3+6Y8 Tacho+Speedo/FMM) for outboard motors 30-70HP:
• 6X3 Remote Control Flush Mount (left side)
• 6Y8 Round Tacho + Speedo/FMM Kit
• 6R5 Panel switch assy Single
• Main harness 10P
• Premium remote control cable (YPM) – 2 pcs.
• Water/Fuel Separator Filteri
Y-COP Attachment Kit
i
Propeller Aluminum, White, G
i
Propeller Black Stainless Steel, G
-
i
-
i
-
i
-
i
-
i
-
i
-
i
-
i
-
i
-
i
-
i
-
i
-
i
Standard equipment: 492 823 грн Interior | Exterior: 0 грн Equipment: 0 грн Outboard motor: 0 грн Optional equipment: 0 грн Trailer: 0 грн Amount: 492 823 грн Discount: * - 0 грн Discounted amount: 0 грн
Fields marked with an asterisk *, are required
Fields marked with an asterisk *, are required
Fields marked with an asterisk *, are required0